Products Description
|
| PPA US Solvay A-1133 HS BK543 creep resistant glass reinforced with 33% polyxylene amide |
High strength: The material has excellent strength and rigidity to meet the needs of high-load applications such as automotive components.
Low water absorption: Its low water absorption characteristics allow it to maintain a stable size and performance in wet environments.
Creep resistance: Even under high temperature and high load conditions, it can effectively resist deformation and ensure the long-term stability of the product.
Chemical resistance: Good resistance to a variety of chemicals, suitable for harsh chemical environments.
Flame retardant: It has certain flame retardant performance and meets strict fire safety standards.
Processing performance: Good injection molding processing performance, easy to mass production and complex shape manufacturing.
Heat resistance: Maintains excellent mechanical properties over a wide temperature range.
Surface gloss: Excellent surface gloss, without additional spraying can obtain satisfactory appearance |
product feature
| A-1133 HS BK | | 543 | | Product information | | | | | Part Marking Code | >PPA< | | | | Material Shape | Pellets | | | | Process | Injection molding | | | | FR | HB | | | | specification | ·UL | | | | Features | ·High strength ·Low water absorption ·Creep resistance | | | UL File NO. | E95746 | | | | Certificate | | | | | Physical property | Standard | Value | Unit | | Density | ISO 1183 | 1.48 | g/cm³ | | Shrinkage Flow 2.0mm | ASTM D995 | 0.4 | % | | Shrinkage xFlow 2.0mm | ASTM D995 | 0.8 | % | | Water Absorption 23℃24hr | ASTM D570 | 0.21 | % | | Mechanical behavior | Standard | Value | Unit | | Tensile Modulus 23℃ | ASTM D638 | 13100 | MPa | | Tensile Modulus 23℃ | ISO 527 | 13400 | MPa | | Tensile Strength 23℃ | ASTM D638 | 221 | MPa | | Tensile Strength 23℃ | ISO 527 | 233 | MPa | | Elongation 23℃ | ASTM D638 | 2.5 | % | | Elongation 23℃ | ISO527 | 2.5 | % | | Poisson Ratio | ASTM E132 | 0.41 | | | Flexural Strength 23℃ | ASTM D790 | 317 | MPa | | Flexural Strength 23℃ | ISO 178 | 319 | MPa | | Flexural Modulus 23℃ | ASTM D790 | 11400 | MPa | | Flexural Modulus 23℃ | ISO 178 | 11600 | MPa | | Izod Notch Impact 23℃ | ASTM D256 | 80 | J/m | | Izod Notch Impact 23℃ | ISO 180 | 8.8 | kJ/m² | | Izod Un-notch Impact 23℃ | ASTM D256 | 770 | J/m | | Izod Un-notch Impact 23℃ | ISO 180 | 49 | kJ/m² | | Charpy Notch Impact 23℃ | ISO 179 | 9.5 | kJ/m² | | Charpy Un-notch Impact 23℃ | ISO 179 | 73 | kJ/m² | | Shearing Strength | ASTM D790 | 101 | MPa | | Thermal | Standard | Value | Unit | | HDT Annealed 0.45MPa | ASTM D648 | 297 | ℃ | | HDT Annealed 1.8MPa | ASTM D648 | 285 | ℃ | | HDT Unannealed 1.8MPa | ISO 75 | 280 | ℃ | | Melting Temperature | ASTM D3418 | 313 | ℃ | | Melting Temperature | ISO 11357 | 313 | ℃ | | CLE Flow | ASTM D696 | 2.4E-5 | cm/cm/℃ | | CLE xFlow | ASTM D696 | 5.5E-5 | cm/cm/℃ | | Electrical properties | Standard | Value | Unit | | Volume Resistivity | ASTM D257 | 1E15 | Ω.cm | | Volume Resistivity | IEC60093 | 1E15 | Ω.cm | | Dielectric Strength | ASTM D149 | 39 | KV/mm | | Dielectric Strength | IEC 60243 | 39 | KV/mm | | Dielectric Constant 1KHz | ASTM D150 | 4.4 | | | Dielectric Constant 1MHz | ASTM D150 | 4.2 | | | Dissipation Factor 1KHz | ASTM D150 | 0.005 | | | Dissipation Factor 1MHz | ASTM D150 | 0.017 | | | Arc Resistance | ASTM D495 | 140 | S | | CTI | ASTM D3638 | 550 | V | |
Application
| Optical lighting
It used to manufacture large lampshade, protective glass, left and right eyepiece tubes of Optical instrument, etc., and can also be widely used as transparent materials on aircraft. | Electronic appliances
It used in the manufacturing of insulation connectors, coil frames, sockets, insulation sleeves, telephone shells and parts, and battery shells for mining lamps, and so on. | Mechanical equipment
It used for manufacturing various gears, racks, worm gears, worms, bearings, cams, bolts, levers, crankshafts, ratchets, and can also be used as mechanical components such as shields |
Physical Property Parameter
Company Profile:
Dongguan Pengchen plastic Co., LTD Was Established On November 15, 2022, Located Indongguan City.
The Company Covers An Area Of More Than 400 Square Meters, And The Three warehouses Cover A Total Area Of 110000 Square Meters, With 50-60 Employees.
Our Company Is An Expert In The Field Of Plastic Raw Materials. A Professional Supplier Of modified Engineering Plastics Raw Materials. Engaged In R&d, Production And Sales Of engineering Plastics.
We Provide High-quality Plastic Raw Materials With Low Order quantity, Reasonable Price And Fast Delivery.
our Product Range Includes Engineering Materials And General Mater
Warehouse:
FAQ
How about our package?
1.All the packing can be customized.
2.Plastic bags for inner packing, good quality moisture-proof bags for outer packing.
3.We generally make 25kgs per small bag by accurate weight, this will be very convenient for the customer using. It’s very easy to
handle the dosage.
What are our business principles?
1.For the trial order, 1tons will be acceptable.
2.We will do our best for the customer as long as you choosing us.
3.We promise to solve all the problems during trading process, our quality and the products will be approved by your side.
What are the advantages of our shipping and delivery?
1.We make sure all the products will be inspected strictly before loading.
2.We will make the shipment within 7 days after confirm the payment.
3.We will recommend the best suitable shipping company for our customer from different countries. Saving cost for our client
| Application | Electronics electrical appliances mobile phones cars |
| Grade | Injection Grade,Extrusion Grade |
| OEM/ODM | Accepted |
