Products Description
| 
| Celanis PA66 A3 H5 G6 Heat stabilized high strength glass fiber reinforced creep resistant plastic raw material for electrical applications |
Excellent mechanical properties: nylon has high mechanical strength and good toughness.
Self-moistening and good friction resistance: Nylon has good self-moistening and small friction coefficient, so it has a long service life as a transmission part.
Excellent heat resistance: such as nylon 46 and other high crystalline nylon thermal deformation temperature is very high, can be used at 150℃ for a long time.
Excellent electrical insulation performance: nylon has high volume resistance, high breakdown voltage resistance, and is an excellent electrical and electrical insulation material.
Flame retardant: PA66 A3 H5 G6 is flame retardant and suitable for application scenarios that require fire safety.
Reinforcement: The material can increase its mechanical strength and rigidity by adding reinforcing agents such as glass fiber.
Chemical resistance: resistant to acid, alkali, most aqueous inorganic salts, halogenated alkane, hydrocarbons, esters, ketones and other corrosion. |
product feature
PA66
A3 H5 G6
Product information
Part Marking Code
Material Shape
Process
FR
Material Attribute | >PA66-GF30<
Pellets
Injection molding
HB
30%Glass Fiber Reinforced | | | | specification | ·UL | | | | UL File NO. | E86034 | | | | Certificate | W | | | | Physical property | Standard | Value | Unit | | Density | ISO 1183 | 1.37 | g/cm³ | | Shrinkage Flow | ISO 294 | 0.3 | % | | Shrinkage xFlow | ISO 294 | 0.5 | % | | Water Absorption 23℃ 24hr | ISO 62 | 0.7 | % | | Water Absorption 23℃ Saturation | ISO 62 | 5 | % | | Mechanical behavior | Standard | Value | Unit | | Tensile Modulus 23℃ | ISO 527 | 10000 | MPa | | Tensile Strength Yield 23℃ | ISO 527 | 170 | MPa | | Elongation 23℃ | ISO527 | 3 | % | | Flexural Strength Yield 23℃ | ISO 178 | 250 | MPa | | Flexural Strength Yield 90℃ | ISO 178 | 160 | MPa | | Flexural Modulus 90℃ | ISO 178 | 5500 | MPa | | Flexural Modulus 23℃ | ISO 178 | 8500 | MPa | | Izod Notch Impact 23℃ | ISO 180 | 11 | kJ/m² | | Izod Notch Impact -30℃ | ISO 180 | 8 | kJ/m² | | Charpy Notch Impact 23℃ | ISO 179 | 12 | kJ/m² | | Charpy Notch Impact -30℃ | ISO 179 | 9 | kJ/m² | | Charpy Un-notch Impact 23℃ | ISO 179 | 55 | kJ/m² | | Charpy Un-notch Impact -30℃ | ISO 179 | 40 | kJ/m² | | Thermal | Standard | Value | Unit | | HDT Unannealed 0.45MPa | ISO75 | 260 | ℃ | | HDT Unannealed 1.8MPa | ISO 75 | 250 | ℃ | | Vicat Softening Temperature 50℃/hr 10N | ISO 306 | 250 | ℃ | | Vicat Softening Temperature 50℃/hr 50N | ISO 306 | 255 | ℃ | | Service Temperature 20000hr | IEC 60216 | 130 | ℃ | | Electrical properties | Standard | Value | Unit | | Dielectric Strength 2.0mm | IEC 60243 | 21 | KV/mm | | CTI | IEC 60112 | 425 | V | | Flammability | Standard | Value | Unit | | Flame Rating NC 0.73mm | UL94 | HB | | | Flame Rating NC1.5mm | UL94 | HB | | | Flame Rating NC 3.0mm | UL94 | HB | | | GWIT 0.80mm | IEC 60695 | 700 | ℃ | | GWIT 3.20mm | IEC 60695 | 675 | ℃ | | GWFI 0.80mm | IEC 60695 | 675 | ℃ | | GWFI 3.2mm | IEC 60695 | 650 | ℃ | | Limting Oxygen Index | ISO 4589 | 26 | % | | UL | Standard | Value | Unit | | UL FlameRating NC 0.73mm | UL94 | HB | | | UL FlameRating NC 1.5mm | UL94 | HB | | | UL FlameRating NC 3.0mm | UL94 | HB | | | RTI Elec NC 0.73mm | UL746B | 130 | ℃ | |
Application
| Optical lighting It used to manufacture large lampshade, protective glass, left and right eyepiece tubes of Optical instrument, etc., and can also be widely used as transparent materials on aircraft. | Electronic appliances It used in the manufacturing of insulation connectors, coil frames, sockets, insulation sleeves, telephone shells and parts, and battery shells for mining lamps, and so on. | Mechanical equipment It used for manufacturing various gears, racks, worm gears, worms, bearings, cams, bolts, levers, crankshafts, ratchets, and can also be used as mechanical components such as shields |
Physical Property Parameter
Company Profile:
Dongguan Pengchen plastic Co., LTD Was Established On November 15, 2022, Located Indongguan City.
The Company Covers An Area Of More Than 400 Square Meters, And The Three warehouses Cover A Total Area Of 110000 Square Meters, With 50-60 Employees.
Our Company Is An Expert In The Field Of Plastic Raw Materials. A Professional Supplier Of modified Engineering Plastics Raw Materials. Engaged In R&d, Production And Sales Of engineering Plastics.
We Provide High-quality Plastic Raw Materials With Low Order quantity, Reasonable Price And Fast Delivery.
our Product Range Includes Engineering Materials And General Mater
Warehouse:
FAQ
How about our package?
1.All the packing can be customized.
2.Plastic bags for inner packing, good quality moisture-proof bags for outer packing.
3.We generally make 25kgs per small bag by accurate weight, this will be very convenient for the customer using. It’s very easy to
handle the dosage.
What are our business principles?
1.For the trial order, 1tons will be acceptable.
2.We will do our best for the customer as long as you choosing us.
3.We promise to solve all the problems during trading process, our quality and the products will be approved by your side.
What are the advantages of our shipping and delivery?
1.We make sure all the products will be inspected strictly before loading.
2.We will make the shipment within 7 days after confirm the payment.
3.We will recommend the best suitable shipping company for our customer from different countries. Saving cost for our client
| Application | Electronics electrical appliances mobile phones cars |
| Grade | Injection Grade,Extrusion Grade |
| OEM/ODM | Accepted |
